Tools that are of good quality are ____ than “bargain” tools.
more dependable
stronger
Lighter
All of the above
15
A wrench that completely surrounds the bolt head or nut is called a(n) ____ wrench.
pipe
adjustable
open-end
box-end
15
The ____ punch is used to make a small indentation in metal before drilling a hole.
center
pin
drift
aligning
15
When using a hacksaw, you should apply light pressure ____.
on the forward stroke
on the backward stroke
None of the above.
on both forward and backward strokes
15
When working with sockets, Technician A states that a socket’s “point” is the size of the square opening for the handle. Technician B states the point of a socket is the box configuration for the bolt head. Who is right?
B only.
Both A and B.
A only.
Neither A nor B.
15
Which of the following is not a socket wrench drive size?
5/8"
3/8"
1/2"
1/4"
15
Insulated tools for use on hybrid vehicle drive trains should be rated at ____V.
1000
660
240
500
15
Which type of pliers is shown in the illustration?
Snap ring.
Combination
Locking
Needle nose.
15
True or False? A magnetic pickup will attract any kind of metal.
False
15
True or False? Proper filing speed is about one stroke per second.
True
15
If the head of a chisel or punch becomes “mushroomed,” the tool must be discarded.
False
15
“Dead blow hammer” is another name for the rubber mallet.
False
15
An adjustable wrench should be used only when other types of wrenches will not fit.
True
15
The 6-point box-end wrench should be used when a bolt head or nut is extremely tight.
True
15
Torx screws have a square indentation in their heads.
False
15
The tip of a pin punch should be ground flat and square.